Description: ImageWriter I: Settings for All Apples (4/94)
Header: ImageWriter I: Settings for All Apples (4/94)

 Article Reviewed/Updated: 25 April 1994

 TOPIC -----------------------------------------------------------

 This article gives the proper settings for all Apple computers connected to
 an ImageWriter I printer.

 DISCUSSION ------------------------------------------------------

 Apple II Family with Super Serial Card:

     Interface:

         The Super Serial Card

                 1 2 3 4 5 6 7          1 2 3 4 5 6 7
             ON        X   X X      ON  X       X
         SW1                    SW2
            OFF  X X X   X         OFF    X X X   X X
                 1 2 3 4 5 6 7          1 2 3 4 5 6 7

         Jumper block points to terminal.

     Cables:

        Internal cable from Super Serial Card to back of
          machine: 590-0021
        Serial Cable from back of machine to printer: 590-0037

     Printer Settings*:

               8 7 6 5 4 3 2 1
        SW 1:      X X
               X X     X X X X
                          OPEN

        SW 2:          4 3 2 1
                           X X
                       X X
                          OPEN

 Apple III and III+:

     Interface:

        Use .Printer Driver and set first byte in Device
        Configuration Block to 0E and use printer switch
        settings A.(9600 Baud) Or leave the settings in the
        Device Configuration Block at the Default values and use
        printer settings B.  (1200 Baud)

     Cables:

        Modem Eliminator 590-0029
        Straight Through Cable 590-0037

     Printer Settings*:

      A & B SETTING
               8 7 6 5 4 3 2 1
        SW 1:      X X
               X X     X X X X
                          OPEN
      A SETTING
        SW 2:          4 3 2 1
                           X X
                       X X
                          OPEN
      B SETTING:
        SW 2:          4 3 2 1
                             X
                       X X X
                          OPEN

 Macintosh:

     Cables:

        Accessory Kit Cable 590-0169

     Printer Settings*:

               8 7 6 5 4 3 2 1
        SW 1:      X
               X X   X X X X X
                          OPEN

        SW 2:          4 3 2 1
                           X X
                       X X
                          OPEN

     To Build your own cable:

        Mac       1    3    5    7    9
                  |    |    |    |    |
        Printer   1    7    3    20   2

 Lisa:

     Cables:

        Modem Eliminator 590-0029
        Straight Through Cable 590-0037

     Printer Settings*:

               8 7 6 5 4 3 2 1
        SW 1:      X X
               X X     X X X X
                          OPEN

        SW 2:          4 3 2 1
                           X X
                       X X
                          OPEN

        Make sure the preferences are set.  Power off the Lisa
        so they are saved.

        *  The diagrams of these switches are presented as seen from the front
           of the Imagewriter I printer. The switches are toggle switches;
           X marks the toggle.

 Article Change History:
 25 April 1994 - Corrected Macintosh settings.


 Support Information Services
 Copyright 1987-1994, Apple Computer, Inc
 Keywords: