Description: ImageWriter II: Connector cables for all Apples Header: ImageWriter II: Connector cables for all Apples With certain adjustments in software, the cable with order number A2C0311 can perform the same function as the cable with order number A9C0313. But the cables themselves are different, with different pinouts, and the A2C0311 cable has about eleven intended functions while the A9C0313 cable has three. To keep the differences clear, keep this in mind: 1. The A2C0311 cable is primarily intended to connect the Apple II family to a Personal Modem. 2. The A9C0313 cable is only intended to connect the Apple II family to an ImageWriter II. You can avoid confusing these cables by using them only for the primary intended functions specified below. I. Apple IIe Modem-8 Cable A. Number: 1. Order: A2C0311 2. Part: 590-0331-B B. Configurations: 1. Primary - from Personal Modem to: a. Apple II b. Apple II Plus c. Apple IIe 2. Secondary - from ImageWriter II or Personal Modem to: a. Apple III b. Macintosh XL c. Lisa 3. Switching: a. From Apple Super Serial Card to ImageWriter II -- SSC jumper block pointing to "TERMINAL" b. From Apple Super Serial Card to Personal Modem -- SSC jumper block pointing to "MODEM" II. Apple IIe Printer-8 Cable A. Number: 1. Order: A9C0313 2. Part: 590-0335-A B. Configurations: 1. From ImageWriter II to: a. Apple II b. Apple II Plus c. Apple IIe III. Macintosh Peripheral-8 Cable A. Number: 1. Order: M0185 2. Part: 590-0332-B B. Configurations: 1. From Macintosh to ImageWriter II or Personal Modem. IV. Apple IIc Peripheral-8 Cable A. Number: 1. Order: A2C4312 2. Part: 590-0333-B B. Configurations: 1. From Apple IIc to ImageWriter II or Personal Modem. Apple Technical Communications Keywords: